Selecting The Receive Mode - Canon Color imageCLASS MF8450c Basic Operation Manual

●
DRPD Mode
DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive
ring patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone number(s)
using only one telephone line. Your fax will automatically monitor incoming calls and based on the ring
pattern, will let you know if the call is a fax or voice call. Set the fax ring pattern that matches the pattern
assigned by your telephone company. Contact your telephone company for availability.
Before using this mode
●
Make sure to do the following:
Subscribe to a DRPD service. Contact your telephone company for availability.
–
– Connect your external telephone to the machine. (See "Introduction of the Machine, " in the e-Manual.)
– Set the receive mode to <DRPD>. (See "Selecting the Receive Mode, " on p. 5-9.)

Selecting the Receive Mode

Select the fax receive mode to suite your needs.
The default setting is <Auto RX>.
1
Press (Main Menu).
2
Press the right Any key to select
<Additional Func.>.
Introduction to Using Fax Functions
3
Use [▼], [▲] or
<Communications Settings>, then press
[OK].
4
Use [▼], [▲] or
<Fax Settings>, then press [OK].
(Scroll Wheel) to select
(Scroll Wheel) to select
5-9