Canon Color imageCLASS MF8450c Basic Operation Manual page 172

6
Use [▼], [▲] or
the original size, then press [OK].
To switch to the A/B Sizes, press the left Any key
to select <A/B Sizes>.
■ If you want to set the same width for all four
borders:
① Use [▼], [▲] or
frame erase width value, then press [OK].
– The default setting is <3/16" (6 mm)>. The
maximum original frame erase width that you
can set is <1 15/16" (50 mm)>.
– To enter values in millimeters, press the left Any
key to select <Enter mm>. When entering the
value in millimeters, you can also use [▼], [▲],
(Scroll Wheel), and
– If you want to change the value, press
(Clear) before entering the new value.
– If you enter a value outside the setting range, a
message prompting you to enter an
appropriate value appears on the screen.
(Scroll Wheel) to select
(Scroll Wheel) to enter a
– (numeric keys).
■ If you want to set the top, left, right, and
bottom widths independently:
① Press the right Any key to select <Adj. Each
Dim.>.
② Use [▼], [▲] or
(Scroll Wheel) to select
the desired frame erase borders, then press
[OK].
To enter values in millimeters, press the left Any
key to select <Enter mm>. When entering the
value in millimeters, you can also use [▼], [▲],
(Scroll Wheel), and – (numeric keys).
Erasing Shadows/Lines
4-43