Canon Color imageCLASS MF8450c Basic Operation Manual page 224

4
Use [▼], [▲] or
<Enter Fax (New)>, then press [OK].
5
Enter the international access code using
– (numeric keys).
6
If necessary, use [▼], [▲] or
Wheel) to select <Pause>, then press
[OK].
– You can enter successive pauses within the fax
number to make the pause time longer.
– You can change the length of a pause inserted
within the fax number in <Set Pause Time>.
The default setting is two second. (See
"Adjusting the Pause Time, " on p. 5-69.)
(Scroll Wheel) to select
(Scroll
7
Enter the country code, the area code,
and the fax number of the recipient.
8
If necessary, use [▼], [▲] or
Wheel) to select <Pause>, then press
[OK].
Pauses entered at the end of fax numbers are
always 10 seconds long.
9
Press (Start).
– Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel>.
Sending Fax Documents
(Scroll
5-23