10
Follow the instructions on the display,
then press
(Start) once for each
original.
Scanning Documents to a USB Memory
This section describes the basic procedure for storing scanned documents to a USB memory.
1
Insert your USB memory to an
appropriate slot on the right side of the
control panel.
11
When scanning is complete, press the
right Any key to select <Done>.
–
Scanning starts and the scanned data is sent
to the specified destination when scanning is
complete.
–
To cancel scanning, press the left Any key to
select <Cancel> or press
2
Place your originals.
3
Press
(Main Menu).
Basic Scanning Operations
(Stop).
8-7