Performing Temperature Measurements - Keysight Technologies U1401B Quick Start Manual

Performing Temperature Measurements

–
WARNING
–
1 Set the slide switch to the M position to
2 Set the rotary switch to mV.
3 Press and hold
4 Plug the thermocouple probe (with adapter)
5 Touch the surface to be measured with the
Keysight U1401B Quick Start Guide
Before measuring the temperature of a circuit or
device, disconnect its power.
The bead type thermocouple probe is suitable for
measuring temperature from –40 °C to 204 °C in
PTFE compatible environments. The probes may
emit toxic gas above this temperature range.
disable the output.
into the INPUT terminals.
thermocouple probe and read the display.
for more than 1 second.
15