5860 Remote Annunciator Installation - Honeywell Silent Knight SK318PT Installation And Operation Manual

4.5 5860 Remote Annunciator Installation

The optional Model 5860 Remote Annunciator, is shown in Figure 4.10. Up to 16 annunciators can be added to the 6820 / 6820EVS sys-
tem in any combination.
5860 installation involves the following steps:
1. Make sure power is off at the panel.
2. Mount the 5860 in the desired location (see Section 4.5.1).
3. Connect the 5860 to the panel (see Section Section 4.5.2).
4. Use the DIP switches on the back of the 5860 to assign an ID# to the 5860 (see Section 4.13.1).
5. The new 5860 module must be added to the system through programming. JumpStart will add the module automatically (see
Section 8.1). You can also add it manually (see Section 9.2.2). Select a name, if desired.
6820 / 6820EVS Manual P/N LS10144-001SK-E:C 09/28/2017
Figure 4.10 Model 5860 Remote Annunciator, Front View
35