Pip】Button; Scale】Button - RGBlink GX4pro User Manual

3.4.2【PIP】Button
PIP mode cann't be enabled unless TAKE MODE is OFF.
Push button and button light is on. LCD shows the <PIP> menu.
LAYOUT
There are 7 layouts available in the menu. PIP L+T, PIP R+T, PIP L+B, PIP R+B, PIP CENTER, PBP L+R and PBP T+B.
Here are 3 examples
SWAP IMAGE
Select on or off to switch the main picture and secondary picture (the small one).
ALPHA
Image transparency setting, the adjustment range is 0 to 16.
SECLECT
Select IMAGE A or IMAGE B.
3.4.3【SCALE】Button
To scale the output image, users can press 【SCALE】
numeral buttons.
After user press 【SCALE】, LCD shows the menu items as follows:
H SIZE: set the horizontal pixels of output image
V SIZE: set the vertical pixels of output image
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
PIP
LAYOUT
SWAP PICTURE
ALPHA
>SELECT IMAGE B
PIP L+T PBP L+R
button and set the parameters by turning knob or pressing
H SIZE
V SIZE
H POS
V POS
ON
PIP L+B
ON
0
PBP T+B
1920
1080
0
0
27