RGBlink GX4pro User Manual page 38

5. Chip selection:select the chip for the corresponding module.
Data Type:It is generally to choose parallel driver for common modules by default (If you would like to
customize some modules needed to select serial data, please contact with our company.
Module Type:If width of single module is 16,then choose 【Regular light board】 .If not,then choose 【Profiled lamp
board(with taps)】.
the actual number of:the width of single module
Number of data rows:the height of single module
Number of data line:It can be viewed according to the number of RBG groups defined by the module interface.
Line decoding mode:138 decoding,etc
Number of data sets:Conventional and Serial can be selected.
Cascade direction:Left to right/Right to left/Top to bottom/Bottom to top
6. Users can remove the √ of 【 state changes automatically 】 , and click 1/2/3/4 to change the display state
according to the observation of the LED screen.
For example,click【1】and observe the color of LED screen,and select【red】if the LED screen shows red.
After all 4 states being done,click【next】
© Xiamen RGBlink Science & Technology Co., Ltd.
38
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com