RGBlink GX4pro User Manual page 17

Table of Contents

H SIZE:set the horizontal pixels of input image to zoom or scale the input signal

V SIZE:Set the vertical pixels of input image to zoom or scale the input signal

H POS:set the horizontal position of image

V POS:set the horizontal position of image

RESET SIZE:if the size is not proper, turn knob to RESET SIZE and press knob

MASK TOP:crop the top of image

MASK BOTTOM:crop the bottom of image

MASK LEFT:crop the left part of image

MASK RIGHT:crop the right part of image

RESET MASK:If the crop not proper, turn knob to RESET MASK and press knob.

3. VGA ADJUST

Non-standard VGA input signal can cause the input image shifting or not in full screen, therefore, users need to

adjust VGA input as follows:

After selecting <AUTO AJUST> the device will automatically adjust the H POS,V POS, CLOCK and PHASE to make

input image no shifting and full screen.

Note:If one <AUTO AJUST> cannot meet the needs, users can do <AUTO AJUST> many times. The system can

automatically save the ADJUST parameter. Users can also go to <AUTO AJUST> by pressing 【VGA】 button for 10s.

4. ADC ADJUST

AUTO ADUST: YES <OK>,NO <MENU>

RESET: YES <OK>,NO <MENU>

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

MASK RIGHT

RESET MASK

H POS

V POS

CLOCK

PHASE

>AUTO ADJUST

RESET

Table of Contents