Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RGBlink GX4pro
Summary of Contents for RGBlink GX4pro
- Page 1 GX4pro User Manual RGB-RD-UM-GX4pro E001 Article No: V1.0 Revision No:...
-
Page 2: Table Of Contents
Chapter 5 Support ..............................30 5.1 Contact Us..............................30 Chapter 6 Appendix..............................31 6.1 Specification..............................31 6.2 Load LED Configuration File........................34 6.3 Terms & Definitions............................41 6.4 Revision History............................48 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 3: Declarations
RGBlink. If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. -
Page 4: Installation Safety Summary
Installation Safety Summary Safety Precautions For all GX4pro processor installation procedures, please observe the following important safety and handling rules to avoid damage to yourself and the equipment. To protect users from electric shock, ensure that the chassis connects to earth via the ground wire provided in the AC power Cord. - Page 5 Unpacking and Inspection Before opening GX4pro processor shipping box, inspect it for damage. If you find any damage, notify the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents against the packing slip. If you find any shortages, contact your sales representative.
-
Page 6: Chapter 1 Your Product
1.1 In the Box AC Power Cord DVI to HDMI Cord USB Cable Note: AC Power Cable supplied as standard according to destination market. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 7: Product Overview
Extended Display Identification Data(EDID management) make sure display perfectly spot to spot. GX4pro can work as LED display controller when universal senders cards is installed. There are 2 empty slots fitting for one 2.6mega pixels sender card or two 1.3mega pixels sender cards. RGBlink dedicated sender card module SubitoNX™... -
Page 8: Rear Panel
DVI input Audio input OUTPUT CONNECTORS Audio Output DVI Output Slots preserved for sender cards POWER Power switch Power IEC-3 CONTROL PORT USB-A RS232 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 9: Front Panel
Restores/Loads saved setting from 1-16 scene and Number 6. HDMI input source selection and Number 2 CVBS input source selection and Number 3 VGA input source selection and Number 4. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... - Page 10 Number 8. Short cut button of Audio Menu and Number 9 Short cut button of Black Out and Number 0. Switch button with transition effect. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 11: Dimension
1.2.3 Dimension Following is the dimension of GX4pro for your reference:： Dimension:480mm×303mm×45mm © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 12: Chapter 2 Install Your Product
TST screen shows as below，meanwhile the device enter initializing state after that，the device will load the previously saved setting. On delivery, the default input is HDMI. INPUT HDMI：NO INPUT SV: 2.00 SN：1043 OUTPUT FORMAT：1920×1080@60 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 13: Chapter 3 Use Your Product
The symbol＊ means the selected item is under editing state, ready to be set or checked The operation diagram is as follows: 3.2 MENU Structure The MENU structure is shown in the figure below: © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 14: Use The Menu
3.3 Use the Menu Use the menu system for convenient and intuitive operation. GX4pro TST display shows the menu items. The TST display will show the default state when the menu is not in use, or the operation has timed out. Using the 【... - Page 15 >RED GREEN BLUE SAVE TO SEND CARD RED,GREEN,BLUE: value range from 0 to 255 SAVE TO SENDER CARD: save above setting to sender card © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 16: Out Bright
NO EXT 2. SIZING ADJUST H SIZE 1024 V SIZE H POS V POS RESET SIZE MASK TOP >> MASK BOTTOM >> MASK LEFT >> © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... - Page 17 ADJUST parameter. Users can also go to <AUTO AJUST> by pressing 【VGA】 button for 10s. 4. ADC ADJUST >AUTO ADJUST >> RESET >> AUTO ADUST: YES <OK>,NO <MENU> RESET: YES <OK>,NO <MENU> © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 18: Output
3.3.4 Output OUTPUT INFO >> OUTPUT FORMAT >> OUTPUT ADJUST >> SCREEN >> RATIO NORMAL PICTURE >> TEXT OVERLAY >> DISPLAY MODE >> GAMMA LINEAR © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... - Page 19 8 BIT COLOR SPACE IMAGE DE ADJUST >> DVI MODE: DIV or HDMI BITS: DVI 8bit ,HDMI 8/10/12 bit COLOR SPACE: IMAGE or VIDEO © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 20 V POS:vertical position, default 0, set the value as the way of H SIZE and V SIZE. MODE-- Mode option, select SCREEN SIZE. RESET:If image quality distorts by improper operation, it can be recover by reset. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 21 Select <SELECT> in 【 PIP 】 menu, push knob turn Knob to select”IMAGE B”, Push <SCALE> to set the size and position of ”IMAGE B” which the VGA picture in this case. LAYOUT PIP L+B SWAP PICTURE ALPHA >SELECT IMAGE B © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 22 HOR STEP VER STEP TEST PATTERN:Value 0-66 AUTO SWITCH: ON or OFF HOR STEP:horizontal color graduation value 0-64 VER STEP:vertical color graduation value 0-64 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 23: Transition
TAKE: Select ON or keep pressing 【 TAKE】 button 3s to enable the function. The selected input signal will be switched to output as the TRANSITION set. 3.3.6 Audio >MUTE VOLUME AUDIO IN IMAGE A HDMI INTERNAL © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 24: Split
1. SYSTEM INFO SYSTEM INFO >> TECH SUPPORT >> WORK TIME >> LOCK FRONT PANEL >> Show flowing information MCU VERSION, VIDEO VERSION, EXT VERSION, SN © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... - Page 25 5. LICENSE SET UP ENETER PASSWORD 090721 and set new password for other users. 6. HOT BACKUP Hot Backup Backup_1 Backup_2 Backup_3 CVBS Backup_4 HDMI Backup_5 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 26: Language
And then go back to the main interface .If user want to switch to DVI signal, push【DVI】 button Then push TAKE button again. VGA signal will be switched to LED screen with set transition effect. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 27: Pip】Button
V SIZE 1080 H POS V POS H SIZE: set the horizontal pixels of output image V SIZE: set the vertical pixels of output image © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 28: Save】Button
LCD shows below: LOAD FROM >SAVE1 FINISHED！ KEY ON FOR ALL SAVES FLASH IS CURRENT SET Push【MENU】to exit LOAD, the button lights go out. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 29: Chapter 4 Ordering Codes
190-0004-04-0 Single 3G SDI Input/Loop Module 190-0004-05-0 Single HDBaseT Input Module 190-0004-08-0 Single SDI Input/Loop Module 190-0001-13-2 Single HDMI Input Module 190-0004-06-0 EXT Module © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 30: Chapter 5 Support
Chapter 5 Support 5.1 Contact Us © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... -
Page 31: Chapter 6 Appendix
720p50/59.94/60 | 1080i50/59.94/60 | 1080P50/59.94/60 VESA 800×600@60 | 1024×768@60 | 1280×768@60 | 1280×1024@60 | 1600×1200@60 | 1920×1080@60 Signal Level TMDS pwl, single pixel input,165MHz band pixels © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... - Page 32 Connector RJ45 Supported SMPTE 480i NTSC,576i PAL, 720p50/59.94/60 | Resolution 1080i50/59.94/60 | 1080p50/59.94/60 VESA 800×600@60 | 1024×768@60 | 1280×768@60 |1280×1024@60 | 1600×1200@60 | 1920×1080@60 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 33 1920 pixels Features Grey 10 bit Processing Frame Rate Delay EDID Management Accessories and Operating Condition Communication RJ11/RS232 USB 2.0 Input Voltage AC100-240V/50-60HZ Max Power © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 34: Load Led Configuration File
You can load LED configuration file from XPOSE software.Install the software in your control computer firstly. 1. Click and select【GX4pro】 2. Click the icon and tick GX4pro in <All Devices>and<Chosen Devices>,the rear panel of GX4pro can be seen in the interface. 3. Click the LAN port to adjust the parameters. - Page 35 Click 【Send to RCard】 to view the real-time change in LED screen;click 【Save to RCard】 to ensure the data without loss. Method 2:Import the file from manufacture to XPOSE. File Type:select Customize Click【Choose File】,select the file from your computer and then click【Load】to import. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 36 Method 3 : If the saved files could not meed your needs,you can click【Parameter Set】to adjust the parameters. Click【Parameters Set】to open adjustment page 1. Click【Device manage】--【Add device】,select NX 600,and click【OK】. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 37 3. Click【Receiving Card】to enter the interface as shown in the left figure. 4. Click【Smart Settings】to set receiving card. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 38 LED screen. For example,click【1】and observe the color of LED screen,and select【red】if the LED screen shows red. After all 4 states being done,click【next】 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 39 ④Save to the receive card:After debugging,click【Save to the receiving card】and the data will not be lost after power off and restart. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 40 Upgrade 1. Click【Setup】--【Hardware upgrade】. 2. Type in password 【admin】 or 168. Send Card Upgrade: ① Select【Send Card】 ② View the version © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 41: Terms & Definitions
●YPbPr: Used to describe the colour space for progressive-scan. Otherwise known as component video. ●VGA： Video Graphics Array. VGA is an analog signal typically used on earlier computers. The signal is non-interlaced in © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com... - Page 42 ● HDMI 2.0b: was released March, 2016, support for HDR Video transport and extends the static metadata signaling to include Hybrid Log-Gamma (HLG). © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 43 ● FC :(Ferrule Connector) is a screw type connector with a 2.5mm ferrule. FC is a round shaped threaded fiber optic connector,mostly used on Datacom, telecom, measurement equipment, single-mode laser. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 44 This includes film as well as video and television standards. ● Video Electronics Standards Association. An organization facilitating computer graphics through standards. VESA: © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 45 ●API: An Application Programming Interface (API) provides a predefined function which allows access capabilities andfeatures orroutines viaa software or hardware, without accessing source code or understanding the details of inner © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 46 ●Genlock: Allows synchronisation of otherwise video devices. A signal generator provides a signal pulses which connected devices can reference. Also see Black Burst and Color Burst. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
- Page 47 The source device will then output the provided EDID data, ensuring proper video image quality. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com...
-
Page 48: Revision History
All information herein is Xiamen RGBlink Science & Technology Co Ltd. excepting noted. is a regis tered trademark of Xiamen RGBlink Science & Technology Co Ltd.While all efforts are made for accuracy at time of printing, we reserve the right to alter otherwise make change without notice.