Use The Menu; Led Configuration - RGBlink GX4pro User Manual

Table of Contents

3.3 Use the Menu

Use the menu system for convenient and intuitive operation. GX4pro TST display shows the menu items. The TST

display will show the default state when the menu is not in use, or the operation has timed out. Using the

【 MENU 】 button and rotary knob in the front panel, the TST display will show the corresponding menus

according to user selections.

Image Control One is installed with SubitoNX™ Quatro Sender Module or other universal sender card.

Here is the led configuration sub-menu.

1. QUICK CONNECT

1.1 SEND CARD SET

CHOOSE CABLE:choose the output LAN port on the Sender,there are 4 ports available.

X,Y : the horizontal and vertical position of the display that the Sender card control the on LED screen.

One port of SubitoNX Sender can control 650K pixels. If a LED screen is under 650K pixels.

X,Y can be 0.

X maximum 1920

Y maximum 1080

SAVE SENDER CARD: save the X,Y setting to sender card.

RESET SEND CARD: reset sender card if parameters set above is not proper.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

>QUICK CONNECT

ADVANCED

CONFIG FILE

>SEND CARD SET

RECEIVE CARD SET

RESET ALL CARD

>CHOOSE CABLE

WIDTH

HEIGHT

SAVE SENDER CARD

RESET SENDCARD

Table of Contents