How To Open The Radar Installation Menu - Furuno FAR-2218 Installation Manual

3. ADJUSTMENTS
How to Use the Menu
1. Press the Power key to turn on the unit.
2. Press the MENU key or click the [MENU] box to
open the main menu.
The [RADAR INSTALLATION] menu does not ap-
pear when the unit is first turned on. It appears on
the main menu after displaying it by following the
procedures on the section 3.1 and is displayed until
the unit is turned off.
3. Operate the track ball or the mouse wheel to select
a menu item then click the left button.
4. Operate the track ball or the mouse wheel to select a menu option then click the
left button. To return to above layer, select [BACK] then click the left button or right
button.
5. If the menu option requires entry of numeric data, rotate the mouse wheel to set
the value, then click the left button.
6. Close the menu by pressing the MENU key once or click the right button few
times.
3.1

How to Open the Radar Installation Menu

The [RADAR INSTALLATION] menu has various items through two pages for adjust-
ment of the radar. To show this menu;
For RCU-014: Press and hold the HL OFF key, then press the MENU key five times.
For RCU-015/016: Put the cursor on the [MENU] box. Press and hold the F1 key, then
right-click five times.
3-2
Page 1 Page 2
Go to page 2.
Go back to
page 1.