How To Select A Customized Echo; How To Edit A Customized Echo - Furuno FAR-2218 Operator's Manual

1. OPERATIONAL OVERVIEW
1.28.1

How to select a customized echo

Left-click the [CUSTOMIZE ECHO] box at the top left
of the screen to cycle through the options and select
a customized echo option.
The available options depend on the settings selected
for [3 SELECT CUSTOM] in the [ECHO] menu. See
section 1.28.5.
1.28.2

How to edit a customized echo

1. Select a customize echo option to edit (see section 1.28.1).
2. Open the menu.
3. Select [1 ECHO].
4. Select [2 CUSTOMIZED ECHO].
Note: You can also right-click the [PICTURE] box to access this menu.
5. Set the items below referring to the sections shown.
• [2 INT REJECTOR]
• [3 ECHO STRETCH]
• [4 ECHO AVERAGE]
• [5 TARGET ANALYZER]*
• [6 HATCHING]*
• [7 NOISE REJECTOR]
• [8 VIDEO CONTRAST TYPE] : described in this section.
• [9 PULSE]
• [2 CONDITION]
• [4 ACE]
*: Available for B/W-type radars only.
Note: To set [2 CONDITION] and [4 ACE], select [0 NEXT] to show the second
page of the [CUSTOMIZED ECHO] menu.
6. Select [8 VIDEO CONTRAST TYPE].
7. Select [1], [2], [3] or [4] (Dynamic Range) or [A], [B], [C] (Curve) as appropriate.
Video contrast and curve change depending on setting for [VIDEO CONTRAST]
(set at installation), as shown in the figure below.
[ VIDEO CONTRAST ] set to [ ADVANCE ] at installation:
4 4
LEVEL
[ VIDEO CONTRAST ] set to [ LEGACY ] at installation:
CONTRAST
4 4
1-44
3 2 2 3
1 1
LEVEL
CONTRAST
C
3 2 2 3
B
1 1
A
: section 1.22
: section 1.23
: section 1.24
: section 1.38
: section 1.38
: section 1.26
: section 1.18
: described in this section.
: section 1.25
A B
LEVEL
C
LEVEL