Network Configuration - Intellian v150NX Installation & Operation User Manual

Network Configuration

This function is available after performing the "iARM Save & Reboot" on page 78.
2
1
3
4
5
6
No. Item
Network
1
Configuration
Management
Interface
2
Configuration
Description
Sets the ACU's Internal IP address and ports.
Sets the Management Port's network configuration. The Management Port is
located on the ACU front panel.
• IP Address: sets the network IP address (Factory default: 192.168.2.1).
• Subnet Mask: sets the subnet mask (Factory default: 255.255.255.0).
• Lease Start Address: sets the lease IP address start range.
• Lease End Address: sets the lease IP address end range.
• Lease Time: sets the lease IP address update time.
Click the "Apply" button to apply the settings to the system.
92
Using AptusNX