Intellian v150NX Installation & Operation User Manual page 45

ü Step 4: Set Bow Offset
For setting bow offset, a trackable satellite must be selected. There are two satellite tracking methods.
Select the desired tracking type. When Antenna tracks the selected satellite, the bow offset will be set up
automatically pbased on the GPS information.
(Option 1: Using Beam Switch Type)
(Option 2: Using Library Type)
Description
• Step 1: choose the "Beam Switch"
button on the "Tracking Type".
• Step 2: select a satellite in beam list
then click the "Apply" button.
Please wait until antenna terminal is
tracking the satellite. The bow offset will
be set up automatically.
• Step 3: check the "Lock On" mark and
click the "Save Satellite" button in the
"Bow Offset" menu to save the bow
offset information to ACU.
If you have no problems, click the "Next"
button.
Description
• Step 1: choose the "Library" button on
the "Tracking Type".
• Step 2: select a satellite in satellite
library list then click the "Start
Searching" button.
Please wait until antenna terminal is
tracking the satellite. The bow offset will
be set up automatically.
• Step 3: check the "Lock On" mark and
click the "Save Satellite" button in the
"Bow Offset" menu to save the bow
offset information to ACU.
If you have no problems, click the "Next"
button.
45
Operating Install Wizard