Network Configuration - Intellian v45C Installation & Operation User Manual

9.10.4 Network Configuration

This function is available after performing the "8.8.3 iARM Save & Reboot" on page 69.
2
1
3
4
5
No. Item
Network
1
Configuration
Management
Interface
2
Configuration
Description
Sets the ACU's Internal IP address and ports.
Sets the Management Port's network configuration. The Management Port is
located on the ACU front panel.
• IP Address: sets the network IP address (Factory default: 192.168.2.1).
• Subnet Mask: sets the subnet mask (Factory default: 255.255.255.0).
• Lease Start Address: sets the lease IP address start range.
• Lease End Address: sets the lease IP address end range.
• Lease Time: sets the lease IP address update time.
Click the Apply button to apply the settings to the system.
NOTE
When clicking the Apply button
after editing the system settings,
this pop-up message will appear.
If you want to automatically save
and reboot the system, select the
NOTE
checkbox and click the Confirm
button.
81
Using AptusNX