Snmp Setting - Intellian v150NX Installation & Operation User Manual

SNMP Setting

2
1
No. Item
SNMP Setting
1
SNMP Agent
2
Configuration
Description
Sets SNMP configuration.
Sets the SNMP configuration.
• SNMP V1/V2 Status: sets SNMP mode.
• V1/V2 Community Name: sets SNMP V2 community name.
• V3 Authentication Type: sets SNMP V3 authentication mode.
• V3 Authentication Encoding: sets SNMP V3 authentication
• encoding.
• V3 Username: sets the V3 username of the SNMP Agent.
• V3 Password: sets the V3 password of the SNMP agent. The password must
be at least an eight character string.
• V3 Private Encoding: sets SNMP V3 private encoding.
• V3 Private Password: sets the V3 private password. The password is must be
at least an eight character string.
• TRAP IP/Port: sets the TRAP IP/Port.
• TRAP Parameter: sets the SNMP trap specific parameter.
Click the "Apply" button to apply the settings to the system. Then perform the
"iARM Save & Reboot" on page 78.
97
Using AptusNX