Iarm Save & Reboot - Intellian v150NX Installation & Operation User Manual

iARM Upgrade Procedures:
1. Browse and select the iARM firmware file (.tgz) that you wish to upgrade. Click on "Start Update" button
to update the iARM firmware. Wait until the page is loaded.
1
NOTE
When selecting the box "Ignore warnings during installation and force the installation to continue"
before performing the upgrade, the warning messages do not appear during the upgrade.
NOTE
2. Once the update starts, the update process will be displayed on the screen. It will take about two minutes
to complete the firmware upgrade.
WARNING
Do not turn off the device power if the firmware upgrade page is displayed. Failure to comply may
lead to damage and/or malfunction of the system.
WARNING
3. Once the upgrade is completed, the iARM module will automatically reboot in 10 seconds.
iARM Save & Reboot
1
2
3
No. Item
iARM Save &
1
Reboot
Save & Reboot
2
Reboot without
3
Saving
Description
Saves settings to the ACU and reboot or reboot the system without saving.
Saves the modified settings and reboots the iARM. All configuration changes
made will be saved in the ACU and effective upon reboot. Click the "Save &
Reboot" button.
Reboots the iARM without saving the modified settings. All configuration changes
made will be lost upon reboot. Click the "Reboot Only" button.
2
78
Using AptusNX