I-View ANYCAM DM-2MIPR04 Series Manual page 70


Storage Management: Click this button to check the current SD card status, such as Capacity
(MB)/ Free Spare (MB)/ Status or format SD card. As shown in the follow figure:
Note: This section will disappear when the IP camera does not plug the SD card.

Restore: Click this button to restore the parameters setting. .
 Export Config: Export and store the existing configuration.
 Import Config: Restore the configuration to the IP camera.
 Restore: Restore the parameters as default setting, choose the difference items to back to default.
 Reboot: Reboot the IP Camera.

Local Settings: Click this button to setup the recording parameters and storage path.
70