I-View ANYCAM DM-2MIPR04 Series Manual page 32

9. Alarm: The
table diagram as below.
10. Face: You can setup the parameters of Face recantation such as black list, white list Database,
confidence, schedule...etc. The detail process will descript on later chapter.
11. Control Panel: Control Pan/Tile/Zoom, Video parameter...etc. The detail functions will
description on next page.
12. Logout: Click this icon to log out.
13. Exit: Click this icon to exit the I.E. browser viewing.
Control Panel function description
Voice intercom: Click this button to enable 2-Way audio communicates between the PC and IP
camera. Click the icon again that the 2-way audio function will be turned off. IP camera must install the
icon will be flash when event is triggered. Click this icon will show the event
For Motorized Lens model only.
Press "+" for Zoom in, Focus near and enlarge IRIS.
Press "-" for Zoom out, Focus far and smaller IRIS.
Press "+" to increase the value of "Brightness /Contract ".
Press "-" to decrease the value of "Brightness /Contract "
Click becomes to default setting.
32