I-View ANYCAM DM-2MIPR04 Series Manual page 68


RTSP: Click this button to setup the parameters of RTSP server.
 Enable RTSP Server: Check this function to enable the RTSP transmission protocol.
 RTSP Port: Change the port number of RTSP port. The default port is 554.
 RTSP Validation: Select the validation method which you want when uses the RTSP transmission.
 Save: Click "Save" icon to store the setting.

Exception Settings: Click this button to setup the alarm output trigger of exception event.
 Exception Type: There are Network Discounted/ IP Address Conflict/ Illegal Access/ HDD
Full/HDD (SD) Error, there are 5 exception types.
 Alarm Output: Entry the value alarm output trigger period. The alarm output will keep on
sending the signal of each trigger.
 Save: Click "Save" icon to store the setting.

User Management: Click this button to Add new user to Modify/Delete existing user.
68