I-View ANYCAM DM-2MIPR04 Series Manual page 67

 Enable: Check " Handle" icon to enable the alarm input function.
 Alarm input: This IP camera support 2 alarm input ports. Select the alarm input port.
 Alarm in name: You can define the alarm input name or location.
 Trigger: Setup the alarm input mode (Normal Close / Normal Open) of trigger single.
 Arming Schedule: Arm schedule of enable alarm input detection. Check/Uncheck from Monday
to Sunday, each date can has its own trigger period.
 Email: Check "Email" and once the event triggers that it will send Email to setting email address.
 Alarm Output: Check "Alarm output" and once the event triggers, the camera will linkage to alarm
output.
 PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
 Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
 Save: Click "Save" icon to store the setting.

Alarm Output: Click this button to setup the alarm output parameters when the event is triggered.
 Output Replay Status: Setup the alarm output mode (Normal Close / Normal Open).
 Output Delay: Entry the value alarm output trigger period. The alarm output will keep on sending
the signal of each trigger.
 Save: Click "Save" icon to store the setting.
67