Table of Contents
Advertisement
4-3. The Function Description of Live Window
After Plug-in is installed, you should be able to see the live video from IP camera as below.
1
This section introduces the function buttons of live window. You can test the IP camera function from
your Brower. The button functions are as below:
1. Main /Sub/Third Streaming: You can toggle switch the Main streaming and Sub streaming to
display on the screen.
2. BPS/FPS information: Display current transmit bit rate and frame rate of IP camera on here.
3. Setup: Click this icon to setup the parameters of IP camera
4. Live: Click this icon to display the video of IP camera.
5. Playback: You can playback the video clips /snapshot of HDD or SD card. The detail process will
descript on later chapter.
6. File: Click this icon to playback video clips or snapshot from the Hard disk or SD card.
7. Log: Click this icon to search the event view log of IP camera.
8. Time Stamp and camera name: Paste the time stamp and camera name on the image. You can
select the display position.
2
3
4
5
6
7
31
8
9
10 11 12
Advertisement
Table of Contents
