I-View ANYCAM DM-2MIPR04 Series Manual page 62

 AntsWebServer: Enable this program for the Internet Browser viewing.
 Fseye: Enable this program for the App of Mobile phone or Pad remote access.
 I8S: Enable this program for the SDK function.
 TelnetServer: For email server application.
 Multicast Config: Click this button to setup Multicast configuration.
 Multicast: Multicast settings for the Video and audio of Mainstreaming and sub streaming. Click
the item to display the detailed configuration information. Check " Enable Multicast" icon to
enable multicast for streams.
The uncast video transmission delivers a stream through point-to-point transmission; multicast, on
the other hand, sends a stream to the multicast group address and allows multiple clients to acquire
the stream at the same time by requesting a copy from the multicast group address Therefore,
enabling multicast can effectively save Internet bandwidth. The ports can be changed to values
between 1025 and 65535.
The multicast RTP port must be an even number and the multicast RTCP port number is the
multicast RTP port number plus one, and thus is always odd.
If the multicast RTP video ports are incorrectly assigned, the following warning message will be
displayed.
62