I-View ANYCAM DM-2MIPR04 Series Manual page 36

NTP Setting:
Check " Enable DST" icon and then select the DST period and DST bias time.
 Save: Check " Save " icon to set up the setting parameters.

Audio Settings: Click this button to setup the Time stamp and Text OSD position.
 Audio Source: Select the audio source from Mic in or Line in.
 Encoding Format: Select the audio encoding types, G711u, G711A, G.726, ADPCM mode.
 Input Value: Adjust the audio input Value, the high number get larger audio in. 0 is mute.
 Output Value: Adjust the audio output Value, the high number get larger sound. 0 is mute.
 Save: Check " Save " icon to set up the setting parameters.
36