I-View ANYCAM DM-2MIPR04 Series Manual page 57

 Face Detection: Click this button to setup the parameters of Face detection.
Note: You MUST enable the Face detection function when run the Face Recognition function.
 Enable: Check "Enable" and select the schedule to enable Face detection function.
 Arming Schedule: Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
 Drawing Area: Select the Detection areas or Shield area from "Area type" section, then press and
drag the left button of Mouse to setup the area. Click "Clear" bottom to clear the current detective
areas.
 Setup
 Minimum Pixel: Setup the minimum pixels of face detection, the system will ignore when the
pixels less than the setting number.
57