I-View ANYCAM DM-2MIPR04 Series Manual page 59

 Alarm Output: Check "Alarm output" and once the event triggers, the camera will linkage to
alarm output.
 PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move
the assign Preset point.
 Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
 Save: Click "Save" icon to store the setting.
 Video Plan: Click this button to setup the recording schedule for the deference event.
 Video Mode: Click this button to setup recording mode.
 Recording Schedule: Press left button of Mouse and drop the mouse to setup recording schedule.
 Pre Record: The video recording period before the event is triggered.
 Post Record: The video recording period after the event triggered.
 Video Edge IP address: This is revised function. .
 Click Save to setup the setting.
 Network Setting: Click this button to setup the Network parameters.
59