Table of Contents
Advertisement
output.
PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
Save: Click "Save" icon to store the setting.
Line Crossing: Click this button to setup triple wire detection function.
Enable: Enable or disable the line cross detection function.
Arming Schedule: Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
Area Setting: Click " Drawing " icon, then press and drag the left Mouse button to setup the
detection lines from Area Setting section. Click the right button to complete the detection region
setting. You can click " Swap AB" to exchange the Point A and B position.
Clear: Click Clear to delete all detection regions
Detection Area: To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters.
54
Advertisement
Table of Contents
