I-View ANYCAM DM-2MIPR04 Series Manual page 39

 ROI Setting: ROI (Region of Interest) encoding is used to enhance the quality of images which are
specified in advance. These ROI areas image will first priority to send out for internet transmission
when bandwidth is not enough.
1. Select the Area number, then check " Enable" icon.
2. Press the left button and drop the mouse to select where want to setup the ROI area.
 Choose the number from Level section. The level higher will get clearer image of ROI.
 Click Save icon to set up the setting.

Video Parameters: Click this button to setup Resolution, Frame rate, Bit rate...etc.
Follow up the process as below to setup the ROI area.
39