I-View ANYCAM DM-2MIPR04 Series Manual page 55

 Detection Type: There are "A B Alarm" and "B A Alarm" modes. Choose one for the
detection type.
 Target Percent: Setup the minimum percentage ration (target size/ image area) of effective counting
targets. Once the targets ration is smaller than the setting value, the system will ignore the target
which passing through the trigger line.
 Email: Check "Email" and once the event triggers that it will send Email to setting email address.
 Alarm Output: Check "Alarm output" and once the event triggers, the camera will linkage to alarm
output.
 PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
 Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
 Save: Click "Save" icon to store the setting.
 VQD (Video Quality Diagnose): Click this button to setup Video quality detection function.
 Enable: Enable or disable the video diagnose function.
55