I-View ANYCAM DM-2MIPR04 Series Manual page 48

counting targets. Once the targets ration is smaller than the setting value, the system will ignore the
target which passing through the trigger line.
 Time: Set the upper limit value for the object left or disappear period, the alarm will be triggered
automatically when the value is more than the setting.
 Email: Check "Email" and once the event triggers that it will send Email to setting email address.
 Alarm Output: Check "Alarm output" and once the event triggers, the camera will linkage to alarm
output.
 PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
 Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
 Save: Click "Save" icon to store the setting.
 Area Detection: Click this button to setup Area detection function.
 Enable: Enable or disable the area detection function.
 Arming Schedule: Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
48