I-View ANYCAM DM-2MIPR04 Series Manual page 50

 Retrograde Detect: Click this button to setup the parameters of the retrograde detects function.
 Enable: Enable or disable the retrograde detect function.
 Arming Schedule: Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
Setup the cross line: Click " Drawing " icon, then press and drag the left Mouse button to setup the
detection lines from Detect area. Click the left button of Mouse to setup the AB direction after
setup the detection area and then right click the Mouse button complete the region and detection
setting. You can click " Swap AB" to exchange the Point A and B position.
 Clear: Click Clear to delete all detection regions
 Detect Area: To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters.
 Detection Type: There is "A B Alarm for the detection type and you can click the Swap AB icon
to change the direction.
 Object Percent: Setup the minimum percentage ration (target size/ image area) of effective
counting targets. Once the targets ration is smaller than the setting value, the system will ignore the
target which passing through the trigger line.
 Email: Check "Email" and once the event triggers that it will send Email to setting email address.
50