I-View ANYCAM DM-2MIPR04 Series Manual page 61

Note that to utilize this feature, it requires an account provided by your ISP.
 Port Settings: If there is a router and you want to access the speed dome through Wide Area
Network (WAN), you need to forward the 3 ports for the IP Camera. Click this button to modify
the HTTP (Default is 80), RTSP (Default is 554) or Device Port number (Default is 5050), Https
streaming port (Default is 443 and click Save to change the setting.
 RTSP Port: Use domain name to access and login device need mapping RTSP, default port is 554.
RTSP Validation: Choose RTSP verification mode, Http-Base64, Http-Digest selectable.
After clicking to check and enable the corresponding RTSP verification mode, when playing RTSP
real-time stream, it needs to verify the user name and password.
 RTMP Port: Use domain name to access and login device need mapping RTMP, The default port
is1935.
 Http/ Https: Click this button to enable/disable the Http/Https function and port.
 Management Platform: Click this button to setup Server program. This function for the System
Integrator only.
61