I-View ANYCAM DM-2MIPR04 Series Manual page 51

 Snapshot: Check "Snapshot" and then select the value of snap interval and Number once the event
triggers that the camera will snapshot and save into the SD card or HDD.
 Record: Check "Record" once the event triggers once the event triggers that the camera will
snapshot and save into the SD card or HDD.
 Alarm Output: Check "Alarm output" and once the event triggers, the camera will linkage to alarm
output.
 PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
 Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
 Save: Click "Save" icon to store the setting.
 Density Detect: Click this button to setup the parameters of density detects to check the people
crowd gathering at a special area.
 Enable: Enable or disable the retrograde detect function.
 Arming Schedule: Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
51