Description Of Menu 7 Functions - Ikegami HLM-3250W Operation Manual

4-9. Description of MENU 7 Functions

ＭＥＮＵ７（ＡＵＤＩＯ）
１． Ｌ ＩＮＥ／Ｓ Ｐ ＣＨ．
２． Ｓ Ｐ ＩＮＰ Ｕ Ｔ ＳＥＬ ．
３． Ｌ ＥＶＥＬ Ｉ ＮＤＩＣＡ Ｔ ＯＲ
４． → ＭＯＤ Ｅ １ （ １３５７ − ２ ４ ６８ ）
５． → ＣＨＡ Ｎ ＮＥＬ ＣＨ １ − ８
６． → ＤＩＭ Ｍ ＥＲ ＨＩ Ｇ Ｈ
ＳＥＴ→ ＥＸＩＴ→
ENT ESC
① Setting the channel of embedded audio outputs
Set any of the following pairs of channels of
embedded audio to be outputted to the front
speaker and the rear analog output connector
(EA-240A/D3G-240A only).
• CH1/2 : The output comes out of the paired CH1
and CH2 channels.
• CH3/4 : The output comes out of the paired CH3
and CH4 channels.
• CH5/6 : The output comes out of the paired CH5
and CH6 channels.
• CH7/8 : The output comes out of the paired CH7
and CH8 channels.
This function can be assigned with the F1 F2
switch on the front panel.
• Default setting is CH1/2.
② Setting the front speaker output signals
Set the signals to be outputted to the speaker on
the front of the monitor.
•AUTO : embedded audios in the SDI input
mode, and analog in other modes
• EMBEDDED : fixed at embedded audios
• ANALOG : fixed at analog
• Default setting is AUTO.
③ Setting the audio level meter display ON/OFF
Used to turn on and off the audio level meter
display.
• Default setting is OFF.
④ Setting the mode display of audio level meter
Set the display mode of the audio level meter.
The number in parentheses shows the order of
display channel.
• 1(1357-2468) : lateral display: odd channels on
the left side of the screen, and
even channels on the right side of
the screen
① Setting the channel of embedded audio outputs
ＣＨ１ ／ ２
② Setting the front speaker output signals
ＡＵＴＯ
③ Setting the audio level meter display ON/OFF
ＯＦＦ
④ Setting the mode display of audio level meter
⑤ Setting the channel display of audio level meter
⑥ Setting the brightness of audio level meter
CH1
CH3
CH5
CH7
- 22 -
• 2(1234-5678) : longitudinal display: CH1, CH2,
CH3, CH4, CH5, CH6, CH7, CH8
from left to right on the screen
• 3(1357-8642) : longitudinal display: odd
channels on the left side of the
screen, and even channels on
the right side of the screen
• Default setting is 1(1357-2468).
<1(1357-2468)>
<2(1234-5678)>
CH2 CH4 CH6 CH8
CH1 CH3 CH5 CH7
⑤ Setting the channel display of audio level meter
Set the display channel of the audio level meter.
• CH 1-2 : CH1 to CH2 is displayed.
• CH 1-4 : CH1 to CH4 is displayed.
• CH 1-8 : CH1 to CH8 is displayed.
• Default setting is CH 1-8.
⑥ Setting the brightness of audio level meter
Set the brightness of the audio level meter.
The level meter image transmissive mode or non-
transmissive mode can be set.
• LOW
• MID
• HIGH
• LOW (MIX) (Image transmissive mode)
• MID (MIX) (Image transmissive mode)
• HIGH (MIX) (Image transmissive mode)
• Default setting is HIGH.
CH2
CH4
CH6
CH8
<3(1357-8642)>
CH3 CH7 CH6 CH2
CH1 CH5 CH8 CH4