Table of Contents
Advertisement
9. Avoid operation or storage in a place exposed to corrosive gas.
Operation or storage in a place where any corrosive gas such as sulfur dioxide, hydrogen sulfide,
chlorine or ammonia is generated may lead to a significant reduction in the monitor service life. It
may also cause failure or electric leakage.
Also avoid using the monitor in a location exposed to high salty wind.
10. Do not use this monitor for such applications as space appliance, nuclear control system as
any medical equipment involving human life.
Quality of LCD panel
Note that because the LCD panel mounted on the monitor is manufactured through the use of
high-precision technology, 99.99% or more of the pixels are effective, but 0.01% or less of them
may be lacking in brightness or lit up constantly.
Internal fan
The internal fan does not run constantly but automatically starts running when the internal
temperature of the monitor rises. When the environmental temperature is low, the internal fan
may not be running, which indicates no fault condition.
At power-on, the fan rotates for a moment for checking its own performance.
In the case of outdoor use, even if the ambient temperature is low, the fan may start running when
the internal temperature of the monitor rises.
Suppose that the fan does not operate properly at power-on or at high temperatures. In such case,
the message "FAN ERROR!" will appear at the top of the screen.
The brightness of the backlight may be reduced in order to keep the internal temperature of the
motor from rising.
If the message "FAN ERROR!" is displayed, contact your dealer or Ikegami service desk.
Warranty
If the product should fail within one year from the date of delivery in spite of the proper use, the
manufacturer will repair the product free of charge. Even if the product is covered by the warranty,
however, the customer will be charged for labor and parts in the following cases.
1. Failure and damage caused by the following:
• Improper use
• Repair or modification performed by the customer
• Transportation, transfer, falling, etc. after the purchase of the product
• External factors such as natural disasters and over-voltage
2. Aged deterioration of the liquid crystal panel and backlight (change in brightness, increase in
the number of luminescent spots and dark points, etc.)
3. Damage, discoloration and degradation of the cabinet including the LCD front protective panel
4. Replacement of the accessories and fuse
If no image comes out in spite of routine adjustment or if the product should seem to fail,
contact your dealer or Ikegami service desk.
Accessories
The monitor comes with the following accessories. Be sure that they are included.
1. Fixed stand (attached on the monitor)
2. Operation manual: 1 copy
3. Parallel remote connector: 1 set
4. Power cable: 1 pc.
* VGA, SVGA and XGA are registered trademarks of International Business Machines Corporation.
* Specifications and external dimensions are subject to change without prior notice.
Advertisement
Table of Contents
