Table of Contents
Advertisement
④ Selecting the analog PC input XGA/WXGA
(Settings only for the CM-240)
When the analog PC input signal is WXGA, the
format may fail to be identified, depending on the
signal timing. In such case, select WXGA.
• Default setting is XGA.
⑤ Executing the automatic adjustment of PC input
(Only for the DVI(PC) and CM-240)
Used to automatically adjust the phase, clock and
horizontal/vertical onscreen position in Items ⑥
thru ⑨ .
With the "EXECUTE" characters blinking, press
the ENT switch, and the automatic adjustment
will be made.
* During the automatic adjustment, do not turn
off the power and switch the input signal.
4-14.Description of MENU 11 Functions
ＭＥＮＵ １ １（ＲＥＳＥＴ）
１ ． Ｌ Ｏ ＡＤ ＦＡ Ｃ ＴＯＲ Ｙ
２ ． ＲＥ Ｓ ＥＴ ＦＩ Ｌ Ｅ
ＳＥ Ｔ → ＥＸＩＴ →
ENT
① Executing the initialization of set data
Perform this setting to restore the default settings.
• ALL
: Factory settings are restored for
all PRESET data, all MENUs
and switches.
• PRESET
: Factory settings are restored for
all PRESET data.
• MENU&SW : Factory settings are restored for
all MENUs and switches.
To initialize, select an item to be initialized with
the ▲ and ▼ switches and press the ENT switch.
The confirmation message appears. Press the ENT
switch again. To cancel the initialization, just press
the ESC switch.
* The initialization of data cannot be executed if
"DATA LOCK" or "ALL LOCK" is set in "5-2. ⑥
Setting of data protection password".
To initialize the data,unlock.
① Executing the initialization of set data
ＡＬＬ
② Selecting the preset files to be initialized
ＡＬＬ
ESC
- 31 -
⑥ Adjusting the horizontal onscreen position with PC
input (Only for the DVI(PC) and CM-240)
Used to adjust the horizontal onscreen position.
⑦ Adjusting the vertical onscreen position with PC
input (Only for the DVI(PC) and CM-240)
Used to adjust the vertical onscreen position.
⑧ Adjusting the clock with analog PC input (Settings
only for the CM-240)
Used to adjust if noticeable vertical stripes appear
onscreen.
⑨ Adjusting the phase with analog PC input
(Settings only for the CM-240)
Used to adjust if horizontal stripes appear or the
characters look blurry onscreen.
② Selecting the preset files to be initialized
When "PRESET " is selected in ① , select a file
for restoring the set data to the factory-set one.
• ALL
: All the preset files are initialized.
• FILEx
: FILEx only is initialized.
(x:1 to 8)
• FILE 1-8 : FILE1 to FILE8 only are initialized.
• D65
: REF D65 only is initialized.
• D93
: REF D93 only is initialized.
• D65/D93 : REF D65 and D93 only are initialized.
Advertisement
Table of Contents
