Description Of Menu 6 Functions - Ikegami HLM-3250W Operation Manual

4-8. Description of MENU 6 Functions

Ｍ Ｅ ＮＵ ６ （Ｖ Ｉ ＤＥ Ｏ ）
１ ． ＣＨ Ｒ ＯＭ Ａ Ｇ Ａ ＩＮ ＵＰ
２ ． ＩＰ ＭＯ Ｄ Ｅ
３ ． Ｈ Ｐ ＯＳ Ｉ ＴＩ Ｏ Ｎ
４ ． Ｖ Ｐ ＯＳ Ｉ ＴＩ Ｏ Ｎ
Ｓ Ｅ Ｔ→ Ｅ ＸＩ Ｔ →
ESC
ENT
① Setting the chroma gain-up ON/OFF
Set the gain-up ON/OFF for chroma signals.
At the time of ON, the chroma gain increases by
+6 dB.
This function can be assigned with the F1 F2
switch on the front panel.
• Default setting is OFF.
② Setting the IP conversion mode
The mode for I → P conversion is set in the
1035i/1080i/1080psF/480i/575i formats.
• FRAME: The information on the previous and
subsequent fields is used to convert
images to progressive ones. Thanks to
this, diagonal interpolation of moving
images is enabled for optimum setting.
• FIELD : The line interpolation in the field is
used to convert images to progressive
ones. In this way, the signal delay can
be minimized.
• Default setting is FRAME.
* If the delay difference between video and audio
are noticeable, change to "FIELD" setting. This
setting will help operate regularly.
Compared to FRAME interpolation, the FIELD
setting may produce jaggies in moving images
viewed diagonally.
① Setting the chroma gain-up ON/OFF
ＯＦ Ｆ
② Setting the IP conversion mode
ＦＲ Ａ ＭＥ
③ Adjusting the horizontal screen position
０
④ Adjusting the vertical screen position
０
- 21 -
③ Adjusting the horizontal screen position
Adjust the horizontal screen position of VIDEO
input (SDI, VBS, COMP).
The settings are memorized for each channel,
each format or the setting of SYNC INT/EXT.
• Default setting is 0.
④ Adjusting the vertical screen position
Adjust the vertical screen position of VIDEO
input (SDI, VBS, COMP).
The settings are memorized for each channel,
each format or the setting of SYNC INT/EXT.
• Default setting is 0.