Table of Contents
Advertisement
(6) Built-in markers
4:3 (16:9 mode), 13:9, 14:9, 15:9, 16:9 (4:3 mode),
1.85:1 (16:9 mode) and 2.35:1 (16:9 mode) line markers
can be displayed.
The monitor can also get the 1%-stepwise safety
marker displayed in the range of 80-99% with respect
to the line marker area.
The safety markers over the effective screen can be
equally preset 1% by 1% in the range of 80-99%.
The monitor also comes standard abundantly with
five-part split and ten-part split crosshatch markers
useful for location alignment.
(7) User marker display function
Up to 10 different user markers, such as line and
box markers, are presettable pixel by pixel to your
desired positions and sizes. The line and box drawing
settings can be easily made with not just the switch
but also the USB mouse. Resulting complicated data
may also be saved on a USB memory so that the data
can be copied to another monitor or stored in a PC.
This function is optimum for positioning in editing
the layout and its display for various types of
information such as teleshopping.
* Patent pending
(8) Shadow function
The shadow function is to shade the area other than
a 4:3 (16:9 mode), 13:9, 14:9, 15:9 or 16:9 (4:3 mode)
marker area on images. The shadow contrast can be
set at 0%, 20%, 40% or 60% on the MENU. The use of
this function allows you to instantly visualize the image
area when converting images with an aspect ratio of
16:9 to those with an aspect ratio of 4:3 or vice versa.
This shadow function can be turned on/off by remote
control and prompt switching is therefore realized.
(9)
Various built-in test signals
The monitor is standard equipped with color bar
signal, grayscale signal with pluge pattern, and window
signal. Various adjustments can therefore be made on
the monitor alone.
(10) Time code display function
It is possible to display the time code (VITC)
multiplexed into HD-SDI signal (ARIB STD-B4 Ver2.0)
on the screen.
The display comes in two sizes, large and small, and
its brightness in three levels.
(11) Waveform monitor/Vector scope display
functions
Waveform monitor of brightness signal can be
displayed. The display comes in two sizes, NORMAL
and SMALL, and its brightness in three levels. The
waveform can also be displayed in any of three
selectable positions and in one of two colors: GREEN
and WHITE. The vector scope can also be readily
displayed.
(12)
2-picture split display function
A previously captured still image and a currently
incoming moving image are displayed split onscreen.
Just one monitor serves to compare the pictures from
two cameras at once on its screen.
(13)
Dot-by-dot display function
All the picture elements of an input signal are
displayed 1:1 according to the pixels of the LCD panel
without scaling the incoming signal (enlarging or
reducing the input signal according to the LCD pixels).
This function is useful in checking transmitted input
signals for pixel defects, camera CCD's scratches, etc.
Only the 1080i/p signal is displayed in 1:1 in the
normal scanning status.
(14) External memory function
Various data (MENU settings, PRESET data, etc.)
can be saved on a USB memory and copied to a PC, on
which the data is ready to manage. Such data may also
be copied to another monitor.
* Keep in mind that when copying the PRESET data
to another monitor, they may be different from monitor
to monitor.
- 2 -
Advertisement
Table of Contents
