Table of Contents
Advertisement
4. MENU Functions
4-1. List of MENU
All functions can be executed in the MENU screen.
MENU1
MENU
(FORMAT)
MENU2
(MODE)
MENU3
(VITC/WFM)
MENU4
(VECTOR SCOPE)
MENU5
(SCREEN CAPTURE)
MENU6
(VIDEO)
MENU7
(AUDIO)
1.VBS FORMAT
Setting the VBS input
2.→ Y /C SEP.
Setting the decoder Y/C separation
3.→ N TSC SETUP LVL
Setting the NTSC setup level
4.DVI FORMAT
Setting the VIDEO line signal of DVI inputs
5.→ Y PbPr/RGB
Setting the YPbPr/RGB signal format of DVI inputs
Various settings of CM-240 COMPONENT inputs
6.COMP. FORMAT
7.→ Y PbPr/RGB
Setting the YPbPr/RGB 1125 signal format of COMP. inputs
8.→ 1 035/1080i
Setting the format with YPbPr/RGB 1125 line inputs
9.→ 4 80i SETUP LVL
Setting the 480i format setup level
Setting SYNC INT/EXT
10.SYNC
(The dashed-line-boxed items are effective with the CM-240 mounted.)
1.FUNCTION1 MODE
Setting the function assignment of F1 (Function 1) switch
2.FUNCTION2 MODE
Setting the function assignment of F2 (Function 2) switch
3.REMOTE NO.
Setting the monitor ID code for remote control
4.CHANGE ASPECT
Setting the automatic/manual aspect ratio change as
per reception channel
5.BACKLIGHT DIM.
Setting the backlight brightness level
6.TALLY
Setting the tally lamp display format
7.REAL SCAN
Setting the same-size (dot-by-dot) display ON/OFF
8.SDI CH LOCK
Setting the SDI channel lock ON/OFF
9.FORMAT DISPLAY
Setting the format display ON/OFF at signal switching
1.SDI VITC
Setting the SDI VITC display ON/OFF
2.→ D IMMER
Setting the SDI VITC display brightness
3.→ S IZE
Setting the SDI VITC display size
4.WFM DISPLAY
Setting the waveform display ON/OFF
5.→ D IMMER
Setting the waveform display brightness
6.→ S IZE
Setting the waveform display size
7.→ P OSITION
Setting the waveform display position (right/center/left)
8.→ C OLOR
Setting the waveform display color (white/green)
1.VECTOR SCOPE
Setting the VECTOR SCOPE display ON/OFF
2.→ D IMMER
Setting the VECTOR SCOPE display brightness
3.→ M AGNIFICATION
Setting the VECTOR SCOPE display magnification ratio
4.→ S CALE
Setting the COLOR BOX scale display (75%/100%)
5.→ P OSITION
Setting the VECTOR SCOPE display position
(right/center/left)
Setting the VECTOR SCOPE display color (white/green)
6.→ C OLOR
1.SCR CAPTURE
Executing the 2-picture split mode
2.→ A REA
Setting the 2-picture split mode display area
1.CHROMA GAIN UP
Setting the chroma gain-up ON/OFF
2.IP MODE
Setting the IP conversion mode (FIELD/FRAME)
Adjusting the horizontal screen position
3.H Cosition
4.V Position
Adjusting the vertical screen position
1.LINE/SP CH.
Setting the paired channels of embedded audio outputs
2.SP INPUT SEL
Setting the audio input signal out of speakers
3.LEVEL INDICATOR
Setting the audio level meter display ON/OFF
4.→ M ODE
Setting the audio level meter display mode
Setting the audio level meter display channel
5.→ C HANNEL
6.→ D IMMER
Setting the audio level meter display brightness
- 10 -
Advertisement
Table of Contents
