Applicable Standards; Safety Standards; Electromagnetic Interference; Environmental Regulations - Ikegami HLM-3250W Operation Manual

Full hd multi format lcd color monitor
Hide thumbs Also See for HLM-3250W:
Table of Contents

Advertisement

(2)Serial remote control
(The controller SRC-301A/Z is optional.)
Input/output terminal:
BNC 1 lines (Loop through)
Input level
1.9Vp-p, Negative polarity
Input impedance
High impedance bridge connection or 75
termination
* For the control items, refer to "Data 4
Control with Remote Controller".
(3)Wireless remote control
(The controller RCT-30A is optional.)
* For the control items, refer to "Data 4
Control with Remote Controller".
(4)RS-485 remote control (customized)
Connector: RJ-45 (loop-through)
Maximum number of connections: 32 units

8. Applicable Standards

8-1. Safety standards

• UL60950-1
• EN60950-1

8-2. Electromagnetic interference

• VCCI: Class-A
• FCC: Class-A
• EN55103-1 E4
• EN55103-2 E4
• EN55022 Class-A

8-3. Environmental regulations

• Compliant with RoHS Directive

9. Mounting Bracket

Equipped with "100mm x 100mm / 200mm x 100mm"
mounting holes compliant with the VESA mount
interface standards. Other mounting holes also
available. (Refer to the external view.)

10. Options

Any one of the following optional modules can
be mounted. Each module is of plug-in type for
easy replacement.
(1) CM-240
"RGB/YPbPr, EXT SYNC module"
RGB/YPbPr : BNC 1 line, single end
EXT SYNC : BNC 1 line, loop through
PC analog RGB: HD D-sub, 15-pin (female),
(2) EA-240A
"Embedded analog audio output module"
This module sets a 2-channel output out of the
XLR-type 5-pin (XLR-5-32 male) outputs CH1/
2, 3/4, 5/6 and 7/8 on the MENU screen.
(3) EA-240D
"Embedded AES/EBU output module"
AES/EBS BNC 8-ch output
(4) SRC-301Z
"Serial remote controller"
Serial remote controller capable of remote
controlled operation simply by connecting the
BNC cable to the serial remote input mounted
as standard.
Just this unit can control all of the monitor
functions. When plural monitors are connected
in loop with BNC cables, up to 99 monitors can
be controlled individually or collectively
(5) RCT-30A
"Infrared remote controller"
Just this unit can control most of the monitor
functions. Up to 99 monitors can be controlled
individually.
* The specifications and appearance of this
product are subject to change for product
improvements without notice.
* Black spots and luminescent spots may occur
in 0.01% or less of the effective pixels of this
product. This is not a failure.
- 47 -
1 line, single end

Advertisement

Table of Contents
loading

Table of Contents