Changing Front Axle Case Oil - Kubota RTV900 Operator's Manual

78 PERIODIC SERVICE
(1) Drain plug
A To prevent serious damage to the hydraulic line, use
only a KUBOTA genuine filter.
BChanging Front Axle Case Oil
1. Park the vehicle on a firm, flat and level surface.
2. To drain the used oil, remove the drain and filling plugs
at the front axle case and drain the oil completely into
the oil pan.
3. After draining, reinstall the drain plug.
4. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
5. After filling, reinstall the filling plug.
Oil capacity
(1) Drain plug
(2) Filling plug with dipstick
0.6 L (0.6 U.S.qts.)
(A) Oil level is acceptable
within this range