Checking Coolant Level; Cleaning Radiator Screen - Kubota RTV900 Operator's Manual

BChecking Coolant Level
To avoid personal injury:
A Do not remove radiator cap while coolant is
hot. When cool, slowly rotate cap to the first
stop and allow sufficient time for excess
pressure to escape before removing the cap
completely.
1. Park the vehicle on a flat surface and raise the seat.
2. Check to see that the coolant level is between the
"FULL" and "LOW" marks of recovery tank.
3. When the coolant level drops due to evaporation, add
water only up to the full level.
In case of leakage, add anti-freeze and water in the
specified mixing ratio up to the full level.
(See "Flush Cooling System and Changing Coolant" in
"EVERY 2 YEARS" in "PERIODIC SERVICE"
section.)
(1) Recovery tank
A If the radiator cap has to be removed, follow the
caution above and securely retighten the cap.
A Use clean, fresh water and anti-freeze to fill the
recovery tank.
A If water should leak, consult your local KUBOTA
Dealer.
(A) "FULL"
(B) "LOW"
BCleaning Radiator Screen
To avoid personal injury:
A Be sure to stop the engine before removing the
screen.
1. Park the vehicle on a flat surface and raise the seat.
2. Detach the screen and remove all foreign materials.
(1) Radiator screen
(2) Cover
A Radiator screen must be clean from debris to prevent
engine from overheating.
PERIODIC SERVICE
(A) "DETACH"
51