Raising And Lowering The Cargo Bed [Without Hydraulic Dump]; Jack-Up Point; Front End; Rear End - Kubota RTV900 Operator's Manual

46 PERIODIC SERVICE
BRaising and Lowering the Cargo Bed
[without hydraulic dump]
To avoid personal injury:
A Always lower and latch the bed before driving.
A Be careful not to catch any part of your body,
such as hands or arms, between the bed and
cab frame or vehicle frame when lifting and
lowering the bed. To prevent injury, use only
the handgrips provided.
The cargo bed may be tilted by releasing the latches on
each side, and then lifting the bed with the handgrips.
Support the bed in the raised position with the propping
rod.
(1) Latch
(2) Handgrip
(1) Propping rod
(A) "LOCK"
(B) "RELEASE"

JACK-UP POINT

To avoid personal injury, death or vehicle damage:
A Do not work under the vehicle unless it is
secured by safe stands or suitable blocking.
BFront End
Jack up at the front bumper only.
(1) Front bumper
(2) Jack
(3) Wooden block
BRear End
Jack up the rear side after placing a wooden block under
the right and left pipe frames for securing the engine and
then supporting it.
Do not jack it up supporting the steel plate portion under
the engine directly.
(1) Pipe frame
(2) Jack
(3) Wooden block