Changing Hydraulic Auxiliary Tank Oil - Kubota RTV900 Operator's Manual

70 PERIODIC SERVICE
BChanging Hydraulic Auxiliary Tank Oil
[Hydraulic utility valve equipped model]
To avoid personal injury:
A Be sure to stop the engine before changing the
oil.
A Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. Park the vehicle on a firm, flat and level surface.
2. Raise the cargo bed and mount the safety support.
3. To drain the used oil, remove the drain plug and filling
plug and drain the oil completely into the oil pan.
4. After draining, reinstall the drain plug.
5. Fill with the new KUBOTA SUPER UDT fluid up to
upper notch on the dipstick.
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
6. After filling, reinstall the filling plug.
Oil Capacity 17 L (18 U.S.qts.)
(1) Drain plug
(2) Filling plug
(3) Dipstick
(A) Oil level is acceptable within
this range