Changing Engine Oil - Kubota RTV900 Operator's Manual

66 PERIODIC SERVICE
BChanging Engine Oil
To avoid personal injury:
A Be sure to stop the engine before changing the
oil.
A Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. Park the vehicle on a flat surface and raise the cargo
bed.
2. To drain the used oil, remove the drain plug at the
bottom of the engine and completely drain the oil into
an oil pan.
All the used oil can be drained out easily when the
engine is still warm.
3. After draining, reinstall the drain plug.
4. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
Oil capacity
(1) Oil inlet (A) Oil level is acceptable within this range
(2) Dipstick
[Filter exchanged]
3.1 L (3.3 U.S.qts.)
[Filter non-exchanged]
2.7 L (2.9 U.S.qts.)
(1) Drain plug