Operating Hand Throttle; Stationary Hydraulic Outlet - Kubota RTV900 Operator's Manual

28 OPERATING THE VEHICLE

OPERATING HAND THROTTLE

[if equipped]
A Pull the hand throttle while pushing the button, and the
engine speed increases.
A Push the hand throttle while pushing the button, and
the engine speed decreases.
A Fine-tune engine speed by turning the hand throttle.
(1) Hand throttle (if equipped)
(2) Button
(A) "PUSH"
"HIGH"
"LOW"

STATIONARY HYDRAULIC OUTLET

[if equipped]
To park the Vehicle and use the hydraulic outlet system
(for breaker or pump, for example), start the hydraulic
outlet system in the following steps.
1. Apply the parking brake and place chocks at the tires.
2. Make sure the shift levers are at "NEUTRAL", and start
the engine.
3. Operate the hydraulic outlet lever.
(See "HYDRAULIC
OUTLET" section.)
4. Set the engine speed to provide recommended fluid
rate. (Refer to the implement operator's manual.)
OUTLET" in "HYDRAULIC