Selecting A Programme - Wexiodisk WD-4S Installation And User Manual

Operating instructions

4.2.3 Selecting a programme

Standard machine
The control panel has three programme buttons P1 (1), P2 (2) and P3 (3).
•
•
•
The washing temperature and chemical washing time for each programme is set
on delivery.
When the door is closed, select a programme. The symbol for the selected pro-
gramme is lit and the machine starts immediately.
It is possible to set the machine for continuous operation, keep the desired pro-
gramme button pressed for approx. 5 seconds on the display's middle section un-
til the symbol is shown that indicates that this has been chosen. On the panel's
"wash" side, the symbol is shown for automatic operation. The programme selec-
tion button for the selected programme is lit. When the door is closed, the washing
starts again immediately. To return to "normal" operation, press one of the pro-
gramme selection buttons that are not lit.
P1=Lightly soiled items (e.g. trays and glassware)
P1
P2=Normal wash (e.g. plates and cups)
P2
P3=Heavily soiled items (e.g. cutlery and pots)
P3
auto
WD-4S
32
Rev. 5.0 (201912)