Table of Contents
Advertisement
Operating instructions
4.2 Washing
4.2.1 Selecting the contact time/wash time
4.2.2 Feeding loads into the machine
4.2.3 Emergency stop
When the machine's feed has started, a text message appears on the display in-
dicating that the machine is ready to wash and specifying a contact time in sec-
onds.
READY TO WASH
CONTACT TIME 110 S
The contact time is the total period during which the load is washed while being
transported through the various washing zones. There are six different times that
can be selected.
•
Select the contact time using knob (4) on the panel.
•
You should select a contact time on the basis of how heavily soiled the load
is:
- in the case of heavily soiled items, select the longest contact time
- in the case of lightly and normally soiled items, select a shorter contact
time.
Before feeding in the items, remove coarse food residues and soak dried food
residues. Note: Ordinary washing-up liquid must not be used for soaking.
The washing stage will start when cutlery drops onto the belt and activates the
photocell (15).
The machine has an emergency stop (13), which is located under the control pan-
el.
If an emergency stop button is pressed during operation, the reason for the emer-
gency stop must be rectified. The emergency stop is then reset by turning the
emergency stop button in the direction indicated by the arrows on the emergency
stop button. Reset the alarm using the reset button (11) and then press the button
(8) to restart the feed.
WD-ACS 47D
22
Rev. 1.0 (202003)
Advertisement
Table of Contents
