VESDA-E VES-A00-P Product Guide
3. Re-install the chamber as shown in Figure 7-18. Be careful to hold looms (A) and (B) in the position
shown so that the looms are not caught between the chamber and other parts of the detector.
4. Secure the four screws which hold the chamber to the detector base (Figure 7-13).
5. Reconnect the loom to J3 (Figure 7-14).
6. Reinstall the Filter. Refer to Section 7.3 on page 81 for further information.
92
Figure 7-18: Install the Chamber
www.xtralis.com